PRODUCT & SERVICE Device Programmer
- MINATO
- PRODUCT & SERVICE
- Device Programmer
- Product lineup
- Device Programmer MODEL 1895/2
Device Programmer MODEL 1895/2 Discontinued product
MODEL for design and development
MODEL for design and development MODEL1895 Based 2 Site Gang Programmer.
For each model
| MODEL | Built-in Socket | Standard buffer memory |
|---|---|---|
| MODEL 1895/2 | 2 | 1Gbit |
MODEL 1895/2 is a 2 site gang programmer with standard 256Mbits memory and max. 1Gbit memory. With optional programmer control software offers control of programmer from PC which is suitable for R & D and samll production.
Special Features
Targeted deive
MODEL 1895/2 is targeting various programable device such as flash memory (NOR, NAND, S-AND), EPROM, flash embeded one-chip microcontroller.
Socket Unit System
By utilizing the combination of socket units and various adaptors, MODEL 1895/2 supports various device package.
Data Transfer
MODEL 1895/2 is equippedwith USB interface. With optional remote control software (XPROM), fast data transfer can be accomplished through USB interface.
Others
The operation is simple and easy.
Socket unit
| Socket unit | DIP array | Target device |
|---|---|---|
| SU08-42D | Two DIP 42pin sockets 8 bits JEDEC assign |
Targeted device: EPROM, EEPROM, flash memory,One-chip Micro Controllers |
| SU16-42D | Two DIP 42pin sockets 16 bits JEDEC assign |
Targeted device: 16 bits EPROM, OTP |
| SU16-48D | Two DIP 48pin sockets 16 bits EIAJ assign |
Targeted device: 16 bits flash memory |
| SU16-48TS | Two TSOP 48pin sockets 16 bits EIAJ TSOP |
Targeted device: 16 bits flash memory |
Socket unit is required. Adapters for CSP, BGA, SOP, TSOP, PLCC and other packages are available. For more information, please download device list from our web site.
Specification
| Targeted device |
EPROM, EEPROM, flash memory,One-chip Micro Controllers
|
|---|---|
| Memory capacity | 128M bytes (1G bits) |
| Maximum gang programming | 2 pieces |
| Operation modes |
COPY: Copy the data from the number one PROM to the buffer of the programmer
BLANK: Blank check of the PROM PROGRAM: Write data into the PROM VERIFY: Compare the data between the buffer memory and the device. CONT: Sequential operation of BLANK, PROGRAM and VERIFY ERASE: Erase the data in the flash PROM SET PROGRAM: 1, 2, 4, 8-programming mode |
| Input data |
Through RS232C/USB and copy of a master ROM data
|
| Interface |
RS232C, USB
|
| Display | 20 x 4 characters LCD |
| Power | 100〜240V、50〜66Hz |
| Dimensions | 380(W)x107(H)x297(D)mm |
| Weight | 5.2kg |
| Power consumption | 30VA (maximum) |
| Operating temperature | 5～35°C |